AiraTec

AiraTec · HUAYU XINCHENG

Smart Home Networks
for the AI Era

Gigabit over existing coax × on-device AI compute × fully local privacy

Products & Solutions Contact Us

Fiber to the building · reuses existing coax · zero in-home rewiring
Fiber Building head-end Existing coax No new cabling In-home unit No power point AI Center 50 TOPS · local Zero new cabling Gigabit to the home Data never leaves home Smart bedside panel Hotel · bedroom Hybrid terminal Mobile + fixed
30 min/home
Zero-damage install · reuse existing coax
50 TOPS
On-device AI compute · fully local inference
<30 ms
Whole-home roaming handover · seamless
In-house IP
Multiple patent filings in progress

SOLUTION ARCHITECTURE

Three-tier network, existing coax, zero in-home power

Fiber reaches the building and coax carries it into each home. Building and unit devices are reverse-powered by the in-home terminal - no power points, no meters, no electricity coordination; one small terminal per home delivers gigabit and on-device AI.

Tier 1 · Fiber Building head-end Fiber uplink · 4 coax downlinks Tier 2 · Unit device Unit T1 switch (4 ports) 1 uplink · 3 homes Tier 3 · In-home In-home terminal MCU / slave gateway · 1x Gigabit AI layer Home AI Center 50 TOPS · fully local Fiber Coax Ethernet Reverse power feed: in-home -> unit -> building head-end (no power points or meters at head-end and unit; electricity borne by the user) Before Drilling walls · per-floor cablingEvery node needs a power pointHigh cost · disruptive works After Reuse coax · no drilling · one small unitNo power points or meters upstairsGigabit + whole-home WiFi + local AI Delivery Head-end x N + unit x MIn-home terminal per home (WiFi optional)OLT from carrier network, out of scope

Main signal flow (fiber / coax / Ethernet) Reverse power feed (DC)

One foundation · two product lines

One technology foundation, two product lines

Product line 1 · Whole-home WiFi (CTTR)

Built on the IEEE 802.3 T1 standard and adapted to existing coaxial cabling: no wall drilling, no re-cabling. Gigabit coverage for the whole home in ~30 minutes, roaming handover <30 ms, 64+ concurrent devices.

Product line 2 · AI Smart Terminals

A three-tier matrix from mainstream to flagship: round-screen voice speaker, hybrid Pad, and Home AI Center (50 TOPS on-device compute, fully local inference). One AI, three form factors.

PRODUCT DETAILS

Ports configured for the scenario

Ethernet, HDMI and USB are ready out of the box for home and hotel deployments; the vented top and standard mounting holes suit wall, cabinet or desk installation.

DC 12–24V RUN / PWR USB ×2 OTG LAN1 LAN2 LAN3 HDMI 接口布局示意
  • DC 12-24VWide-range DC input
  • LAN1 / LAN2Primary Ethernet
  • LAN3Third Ethernet port
  • HDMIVideo output
  • USB x2Peripheral expansion
  • OTG / RUN / PWRDebug and status LEDs

Vented top

Large honeycomb vents for stable long-run operation

壁挂 / 弱电箱

Standard mounting holes

Wall or cabinet mounting, no desk space needed

MGW7244 MGW7244
MDT8304 MDT8304
SGW8222 SGW8222
SGW8221 SGW8221
MCU8211S MCU8211S
SDT8301E SDT8301E

APPLICATIONS

One foundation, three deployments

Reuse existing coax, avoid new power points, keep AI local - the same networking and compute foundation takes a different delivery form in homes, hotels and campuses.

Home

Whole-home WiFi + Home AI

  • No drilling, no re-cabling, about 30 minutes
  • Whole-home Gigabit, <30 ms handover
  • AI inference stays in the home

Hotel

Guest network + voice panel

  • No new power points, no renovation work
  • Bedside voice panel served locally
  • One foundation covers every floor

Campus / operator

Fiber to building + coax in-home

  • No power points or meters at head-end
  • Reuse existing coax, no disruption
  • Operable after delivery, service continues

Our position

The home market is not won on TOPS

We do not compete in the compute arms race. We focus on four things: whole-home coverage, privacy that never leaves the home, reuse of existing wiring, and operator channels — bringing AI into ordinary homes.

Two technical paths

The same goal, a different path

We do not review any vendor’s product — only the objective difference between two technical paths.

Common approachThe AiraTec path
Backhaul Wireless mesh; throughput drops at every hop Wired backhaul over coax; full gigabit, no drop
Installation New fiber or cable through walls; disturbs the home Reuse existing coax; about 30 minutes, no damage
Where AI runs Cloud inference: privacy concerns plus recurring subscription 50 TOPS on-device, fully local; data never leaves the home
Product form A single device; delivery is the end of value Networking plus compute in one; value continues after delivery

Core capabilities

From physical media to on-device intelligence

Physical layer

IEEE 802.3 T1 engineering on existing coax; low-cost solutions co-developed with domestic PHY partners.

On-device AI

Three-tier product matrix, fully local inference on the device, multiple models resident with zero switching.

Channel & delivery

20 years of experience with telecom operators, with carrier-grade management, delivery and operations capability.

Deterministic connectivity and local AI for every home

Operators, MSOs, distributors and ecosystem partners are welcome to reach out.

Contact Us